Protector of Perfection
| Details | Values |
|---|---|
|
SPEED |
400 - 4000 1/MIN |
|
ISSUE |
8 - 200 W |
|
DIAMETER |
72 mm |
UP TO
IP69K
IN DEVELOPMENT
8
-
200
WATT
STAINLESS STEEL MOTORS ROTECT
Motors in hygienic design
Thanks to their smooth surface, ROTECT stainless steel motors are particularly suitable for hygienic processes. Encapsulated in a housing made of stainless steel 1.4404, the design of which is characterised by particularly smooth surfaces and the consistent avoidance of dirt pockets, they meet the highest hygienic requirements. Manufactured in protection class IP68 10 bar, they offer optimum protection for high-pressure cleaning and highly corrosive ambient conditions.
In industries where hygiene is the top priority, every detail counts, even with installed components. Rotek supplies Rotect motors with the appropriate resistant cables and corresponding connectors or cable glands, depending on customer requirements and application. These properties make ROTECT an outstanding drive solution in food production, chemicals, pharmaceuticals and offshore technology.
Information on
Properties
- Housing in stainless steel 1.4404
- Hygienic design
- Smooth surfaces
- up to IP69K (in development)
- Suitable for high-pressure cleaning
INDUSTRY
- Food
- Drinks
- Chemistry
- Pharmacy
- Offshore
AREA OF APPLICATION
- Ambient temperature: - 25°C to + 40°C
- for operation in the spray area
- (No direct product contact)
FREE CHOICE OF MOTOR TECHNOLOGY
The ROTECT drives also offer maximum flexibility in motor technology. You have a free choice between our AC and three-phase motors as well as BLDC drives with peak outputs of up to 200 W. In combination with our integrated planetary gearboxes, which allow permissible peak torques of up to 75 Nm, the result is high-performance drives that impress across the board, allowing users to utilise the special advantages of Robase, Rosync, Roslyde or Romotion motors in environments that require a hygienic design.
In conjunction with our integrated planetary gearboxes, which allow permissible peak torques of up to 75 Nm, high-performance drives are created that are convincing across the board, and the simultaneous engagement of three planetary gears per stage allows the highest forces to be transmitted in the smallest installation space. Robust, maintenance-free and with a wide range of variants, they are predestined for the most demanding requirements. Thanks to their excellent efficiency, they form a particularly compact and efficient drive unit with our motors. And if it needs to be particularly quiet, there is also a low-noise version in our programme.
ADVANTAGES
- High torque in a small installation space
- High impact resistance
- Very good efficiency
Properties
- Concentric shaft output
- Low gear backlash
- Maintenance-free
OPTIONS
- Low-noise versions
- Special shafts and flanges
- Special lubrications
| General information | |
| Gear wheels | Hardened steel with high load capacity |
| Shaft bearing | 2 ball bearings positioned one behind the other |
| Lubrication | Lifetime greasing |
| Installation positions | any |
| RoHS, WEEE, REACH | ✓ |
| Boundary data | |
| Gear backlash | max. 0.9° (R series: 2.0°) |
| Max. Radial/axial load | |
| Type P | 150 N / 50 N 1-stage |
| 250 N / 80 N 2-stage | |
| 350 N / 110 N 3-stage | |
| Type R | 190 N / 50 N 1-stage |
| 280 N / 80 N 2-stage | |
| 410 N / 110 N 3-stage | |
| Length in mm | Weight in kg | |||||
|---|---|---|---|---|---|---|
| Geared motor | 1-stage | 2-stage | 3-stage | 1-stage | 2-stage | 3-stage |
| Planetary gearbox P | ||||||
| Rotect 34 / 36 | 160 | 200 | 200 | 2,40 | 2,80 | 3,00 |
| Rotect 44 / 46 | 160 | 200 | 200 | 2,60 | 3,00 | 3,20 |
| Rotect 64 / 66 | 200 | 200 | 240 | 3,05 | 3,25 | 3,60 |
| Rotect 84 / 86 | 240 | 240 | 240 | 3,60 | 3,80 | 4,00 |
| Planetary gearbox R | ||||||
| Rotect 34 / 36 | 160 | 200 | 200 | 2,55 | 3,10 | 3,45 |
| Rotect 44 / 46 | 160 | 200 | 200 | 2,75 | 3,30 | 3,65 |
| Rotect 64 / 66 | 200 | 200 | 240 | 3,20 | 3,55 | 4,05 |
| Rotect 84 / 86 | 240 | 240 | 240 | 3,75 | 4,10 | 4,45 |
Data ROTECT with planetary gearbox
OUTPUT DATA STAINLESS STEEL MOTOR ROTECT WITH ROBASE 6-POLE
| Translation of | Permissible torque (peak) | Speed | Torque of the motor types | ||||
|---|---|---|---|---|---|---|---|
| i | Type P | Type R | 1/min | 36 | 46 | 66 | 86 |
| Nm | Nm | Nm | Nm | Nm | Nm | ||
| Operating mode | S3 75 % | S3 50 % | S3 50 % | S3 33 % |
|||
| 1-stage η = 80 % | |||||||
| 3,7 | 4 (6) | 8 (12) | 270,3 | 0,22 | 0,33 | 044 | 0,62 |
| 2-stage η = 75 % | |||||||
| 13,7 | 12 (18) | 25 (37) | 73,0 | 0,77 | 1,13 | 1,54 | 2,16 |
| 25 | 40,0 | 1,41 | 2,06 | 2,81 | 3,94 | ||
| 3-stage η = 70 % | |||||||
| 50,9 | 25 (37) | 50 (75) | 19,06 | 2,67 | 3,92 | 5,34 | 7,48 |
| 58,9 | 17,0 | 3,09 | 4,54 | 6,18 | 8,66 | ||
| 68,1 | 14,7 | 3,58 | 5,24 | 7,15 | 10,01 | ||
| 92,7 | 10,8 | 4,87 | 7,14 | 9,73 | 13,63 | ||
| 107,2 | 9,3 | 5,63 | 8,25 | 11,26 | 15,76 | ||
| 129,6 | 7,7 | 6,80 | 9,98 | 13,61 | 19,05 | ||
| 168,9 | 5,9 | 8,87 | 13,01 | 17,73 | 24,83 | ||
| 236,1 | 4,2 | 12,40 | 18,18 | 24,79 | 34,71 | ||
| 307,6 | 3,3 | 16,15 | 23,69 | 32,30 | 45,22 | ||
OUTPUT DATA STAINLESS STEEL MOTOR ROTECT WITH ROBASE 4-POLE
| Translation of | Permissible torque (peak) | Speed | Torque of the motor types | ||||
|---|---|---|---|---|---|---|---|
| i | Type P | Type R | 1/min | 36 | 46 | 66 | 86 |
| Nm | Nm | Nm | Nm | Nm | Nm | ||
| Operating mode | S3 75 % | S3 50 % | S3 50 % | S3 33 % |
|||
| 1-stage η = 80 % | |||||||
| 3,7 | 4 (6) | 8 (12) | 405,4 | ||||
| 2-stage η = 75 % | |||||||
| 13,7 | 12 (18) | 25 (37) | 109,5 | ||||
| 25 | 60,0 | ||||||
| 3-stage η = 70 % | |||||||
| 50,9 | 25 (37) | 50 (75) | 29,5 | 2,14 | 3,21 | 4,28 | 6,41 |
| 58,9 | 25,5 | 2,47 | 3,71 | 4,95 | 7,42 | ||
| 68,1 | 22,0 | 2,86 | 4,29 | 5,72 | 8,58 | ||
| 92,7 | 16,2 | 3,89 | 5,84 | 7,79 | 11,68 | ||
| 107,2 | 14,0 | 4,50 | 6,75 | 9,00 | 13,51 | ||
| 129,6 | 11,6 | 5,44 | 8,16 | 10,89 | 16,33 | ||
| 168,9 | 8,9 | 7,09 | 10,64 | 14,19 | 21,28 | ||
| 236,1 | 6,4 | 9,92 | 14,87 | 19,83 | 29,75 | ||
| 307,6 | 4,9 | 12,92 | 19,38 | 25,84 | 38,76 | ||
OUTPUT DATA STAINLESS STEEL MOTOR ROTECT WITH ROSYNC
| Translation of | Permissible torque (peak) | Speed | Torque of the 1 ~ motor types | Torque of the 3 ~ motor types | |||
|---|---|---|---|---|---|---|---|
| i | Type P | Type R | 1/min | 44 | 84 | 44 | 84 |
| Nm | Nm | Nm | Nm | Nm | Nm | ||
| Operating mode | S3 50 % | S3 33 % | S3 50 % | S3 33 % |
|||
| 1-stage η = 80 % | |||||||
| 3,7 | 4 (6) | 8 (12) | 405,4 | 0,38 | 0,68 | 0,95 | 1,6 |
| 2-stage η = 75 % | |||||||
| 13,7 | 12 (18) | 25 (37) | 109,5 | 1,34 | 2,36 | 3,29 | 5,55 |
| 25 | 60,0 | 2,44 | 4,31 | 6,00 | 10,13 | ||
| 3-stage η = 70 % | |||||||
| 50,9 | 25 (37) | 50 (75) | 29,5 | 4,63 | 8,19 | 11,40 | 19,24 |
| 58,9 | 25,5 | 5,36 | 9,48 | 13,19 | 22,26 | ||
| 68,1 | 22,0 | 6,20 | 10,96 | 15,25 | 25,74 | ||
| 92,7 | 16,2 | 8,44 | 14,92 | 20,76 | 35,04 | ||
| 107,2 | 14,0 | 9,76 | 17,26 | 24,01 | 40,52 | ||
| 129,6 | 11,6 | 11,79 | 20,87 | 29,03 | 48,99 | ||
| 168,9 | 8,9 | 15,37 | 27,19 | 37,83 | 63,84 | ||
| 236,1 | 6,4 | 21,49 | 38,01 | 52,89 | 89,25 | ||
| 307,6 | 4,9 | 27,99 | 49,52 | 68,90 | 116,27 | ||
OUTPUT DATA STAINLESS STEEL MOTOR ROTECT WITH ROSLYDE
| Translation of | Permissible torque (peak) | Speed | Torque of the 1 ~ motor types | Torque of the 3 ~ motor types | |||
|---|---|---|---|---|---|---|---|
| i | Type P | Type R | 1/min | 44 | 84 | 44 | 84 |
| Nm | Nm | Nm | Nm | Nm | Nm | ||
| Operating mode | S1 | S3 50 % | S1 | S3 75 % |
|||
| 1-stage η = 80 % | |||||||
| 3,7 | 4 (6) | 8 (12) | 405,4 | 0,21 | 0,41 | 0,38 | 0,7 |
| 2-stage η = 75 % | |||||||
| 13,7 | 12 (18) | 25 (37) | 109,5 | 0,72 | 1,44 | 1,34 | 2,67 |
| 25 | 60,0 | 1,31 | 2,63 | 2,44 | 4,88 | ||
| 3-stage η = 70 % | |||||||
| 50,9 | 25 (37) | 50 (75) | 29,5 | 2,49 | 4,99 | 4,63 | 9,26 |
| 58,9 | 25,5 | 2,89 | 5,77 | 5,36 | 10,72 | ||
| 68,1 | 22,0 | 3,34 | 6,67 | 6,20 | 12,39 | ||
| 92,7 | 16,2 | 4,54 | 9,08 | 8,44 | 16,87 | ||
| 107,2 | 14,0 | 5,25 | 10,51 | 9,76 | 19,51 | ||
| 129,6 | 11,6 | 6,35 | 12,70 | 11,79 | 23,59 | ||
| 168,9 | 8,9 | 8,28 | 16,55 | 15,37 | 30,74 | ||
| 236,1 | 6,4 | 11,57 | 23,14 | 21,49 | 42,97 | ||
| 307,6 | 4,9 | 15,07 | 30,14 | 27,99 | 55,98 | ||
OUTPUT DATA STAINLESS STEEL MOTOR ROTECT WITH ROMOTION
| Translation of | Permissible torque (peak) | Rated speed - Rated torque | ||||||
|---|---|---|---|---|---|---|---|---|
| i | Type P | Type R | ROMOTION 44.2 | ROMOTION 84.2 | ROMOTION 84.4 | |||
| Nm | Nm | 1/min | Nm | 1/min | Nm | 1/min | Nm | |
| 1-stage η = 80 % | ||||||||
| 3,7 | 4 (6) | 8 (12) | 837,8 | 0,74 | 837,8 | 1,01 | 864,9 | 1,15 |
| 2-stage η = 75 % | ||||||||
| 13,7 | 12 (18) | 25 (37) | 226,3 | 2,57 | 226,3 | 3,49 | 233,6 | 4,01 |
| 25 | 124,0 | 4,69 | 124,0 | 6,38 | 128,0 | 7,31 | ||
| 3-stage η = 70 % | ||||||||
| 50,9 | 25 (37) | 50 (75) | 60,9 | 8,91 | 60,9 | 12,11 | 62,9 | 13,90 |
| 58,9 | 52,6 | 10,31 | 52,6 | 14,02 | 54,3 | 16,08 | ||
| 68,1 | 45,5 | 11,92 | 45,5 | 16,21 | 47,0 | 18,59 | ||
| 92,7 | 33,4 | 16,22 | 33,4 | 22,06 | 34,5 | 25,31 | ||
| 107,2 | 28,9 | 18,76 | 28,9 | 25,51 | 29,9 | 29,27 | ||
| 129,6 | 23,9 | 22,68 | 23,9 | 30,84 | 24,7 | 35,38 | ||
| 168,9 | 18,4 | 29,56 | 18,4 | 40,20 | 18,9 | 46,11 | ||
| 236,1 | 13,1 | 41,32 | 13,1 | 56,19 | 13,6 | 64,46 | ||
| 307,6 | 10,1 | 53,83 | 10,1 | 73,21 | 10,4 | 83,97 | ||
Worth knowing
What is hygienic design?
Rotect stainless steel motors provide optimum protection in highly corrosive and harsh environmental conditions. What needs to be considered in hygienic design?
Presented at SPS
At SPS 2019, we had a visit from Eric Schäfer, the editor-in-chief of Konstruktion & Entwicklung. You can find his article about the Rotect here.
Clean business - Rotect
Rotek presented its Rotect motor series in hygienic design for the first time at SPS 2019. Rolf Treusch explains the benefits in an interview.
Gearboxes that fit the Rotect
ROTECT with planetary gearbox
We supply our ROTECT motors with planetary gearboxes of types P and R. All planetary gearboxes are characterised in particular by their optimum power density and permanent load capacity.