COMPACT DESIGN – GREAT DURABILITY
Our three flat-gear series meet a great variety of requirements. The smallest, gear A, is fully fitted with ball bearings and is suitable for the most demanding applications, whereas gear B is a simple, low-cost gear for higher-volume demands. The possibility of high gear ratios is advantageous. Depending on your needs, adjustable solid and hollow shafts are available. Gear C, the strongest variant, has a hollow shaft with ball bearings and can be fitted with an optional release mechanism. On request, it is also available with a solid shaft.
max. torque 10 – 27 Nm
gear ratios i = 30:1 – 1586:1
output shaft 8 – 15 mm,
(B / C optional with hollow shaft)
for motors 20 – 50 W
BENEFITS
• flat design
• high efficiency
CHARACTERISTICS
• sturdy
• maintenance free
OPTIONS
• special and hollow shafts
• low-noise versions
• special lubrications
MOTORS WITH FLAT GEARS A, B, C
By clicking inside the table you will enlarge it.
Flat gears with ROBASE motors 6-poles
Exceeding the maximum permissible torque may lead to gear damage. Three-phase variants offer 10 to 30 % more torque. The gear ratio figures have been rounded (+/–3 % tolerance).
Flat gears with ROBASE motors 4-poles
Exceeding the maximum permissible torque may lead to gear damage. Three-phase variants offer 10 to 30 % more torque. The gear ratio figures have been rounded (+/–3 % tolerance).
Flat gears with
ROSYNC motors
Exceeding the maximum permissible torque may lead to gear damage. The gear ratio figures have been rounded (+/–3 % tolerance).
Flat gears with
ROSLYDE motors
Exceeding the maximum permissible torque may lead to gear damage. The gear ratio figures have been rounded (+/–3 % tolerance).
MOTORS WITH FLAT GEARS A
MOTORS WITH FLAT GEARS B
MOTORS WITH FLAT GEARS C
intelligent and
networked
 |
80 – 200 W output |
|
400 – 4000 1/min |
|
24 – 48 V DC |
Technical specifications you will find »» here
low-vibration and
low-noise
 |
11 – 40 W output |
|
1500 1/min |
|
1 ~ 24 V – 3 ~ 500 V |
Technical specifications you will find »» here
extreme compact,
efficient
 |
20 – 85 W output |
|
1500 1/min |
|
1~24 V – 3~500 V |
Technical specifications you will find »» hier:
versatile,
self-holding
 |
8 – 50 W output |
|
1000/1500 1/min |
|
1~24 V – 3~500 V |
Technical specifications you will find »» here:
SYNCHONOUS MOTORS WITH FLAT GEARS A, B, C
BLDC-MOTORS ROMOTION WITH FLAT GEARS A, B, C ON REQUEST
